How To Install A Front Crash Bar

Saturday, 12. 6. 2008  –  Category: How To Guides, Paint & Body Maintenance, Vespa Maintenance Guide

Step 1.

Remove the rubber insert from the floor channel as shown on the photo. Then drill a 5mm hole in one of the existing riverts.

 

 

Step 2.

Mount Crash Bar Bottom With Fixings that were supplied as part of the kit.

Step 3.

 Lift the front bar Into place and then tighten the front arms so that they are even. That is it.  

Source: Allstate Scooter

Share/Save/Bookmark

Tags:

Leave a Reply